欢迎各位兄弟 发布技术文章

这里的技术是共享的

You are here

CentOS下Pure-ftp安装配置 有大用


一、安装 pure-ftp

#默认的yum源不包含pure-ftpd,需先安装epel扩展源
yum install -y epel-release
yum install -y pure-ftpd

二、配置 pure-ftp

1、创建 ftp 系统用户

# 创建用户 ftp
useradd ftp -s /sbin/nologin

2、配置FTP存储根目录

# 创建 FTP 存储根目录
mkdir /data/ftp

# 设置 FTP 根目录权限
chown -R ftp.ftp /data/ftp/

3、编辑 pure-ftp 配置文件

编辑 pure-ftp 配置文件 /etc/pure-ftpd/pure-ftpd.conf 部分参数如下:

# PureDB 用户数据库路径(重要)
PureDB                       /etc/pure-ftpd/pureftpd.pdb

# 锁定所有用户到家目录中
ChrootEveryone               yes

# 如果虚拟用户的目录不存在则自动创建
CreateHomeDir                yes 

# 兼容不同客户端
BrokenClientsCompatibility   yes 

# 显示隐藏文件
DisplayDotFiles              no

# 防止命令误操作
CustomerProof                yes 

# 被动模式端口范围
PassivePortRange             30000 50000

# 被动模式 IP 
ForcePassiveIP               192.168.1.100

# 只允许匿名用户访问
AnonymousOnly                no 

# 不允许匿名用户访问(为 no 时允许)
NoAnonymous                  yes

# 不允许匿名用户上传文件(为 no 时允许)
AnonymousCantUpload          yes

# 不允许匿名用户创建目录(为 no 时允许)
AnonymousCanCreateDirs       yes

# 仅运行认证用户进行FXP传输
AllowUserFXP                 no 

# 对匿名用户和非匿名用户允许进行匿名 FXP 传输
AllowAnonymousFXP            no 

# 设置日志的告警级别,默认为 ftp,none 是禁止记录日志
SyslogFacility               none

4、创建 ftp 虚拟用户

# 创建 ftp 用户 aaa 家目录
mkdir /data/ftp/aaa
chown -R ftp.ftp /data/ftp/aaa/

# 创建 ftp 用户 aaa, -u 是将虚拟用户 aaa 与系统用户 ftp 关联在一起,aaa 账号登录后是以 ftp 的身份来读取和下载文件,-d 是指定ftp_usera账户的家目录,这样可以使用户 aaa 只能访问其家目录 /data/ftp/aaa/。
pure-pw useradd aaa -u ftp -d /data/ftp/aaa/

# 创建用户信息数据库文件,这一步很关键。
pure-pw mkdb

# 查看已创建的账号列表
pure-pw list

5、启动 pure-ftp 服务

# 启动 pure-ftp 服务
systemctl start pure-ftpd.service

# 添加开机启动项
systemctl enable pure-ftpd.service

# 或使用
systemctl enable --now pure-ftpd.service

6、使用客户端测试连接

使用 Windows 或 Linux 客户端登录 FTP 测试服务是否正常。

三、配置文件 /etc/pure-ftpd/pure-ftpd.conf 完整参数说明

############################################################
#                                                          #
#         Configuration file for pure-ftpd wrappers        #
#                                                          #
############################################################

# If you want to run Pure-FTPd with this configuration   
# instead of command-line options, please run the
# following command :
#
# /usr/local/pureftpd/sbin/pure-config.pl /usr/local/pureftpd/etc/pure-ftpd.conf
#
# Please don't forget to have a look at documentation at
# http://www.pureftpd.org/documentation.shtml for a complete list of
# options.

# Cage in every user in his home directory
# 锁定所有用户到家目录中
ChrootEveryone              yes



# If the previous option is set to "no", members of the following group
# won't be caged. Others will be. If you don't want chroot()ing anyone,
# just comment out ChrootEveryone and TrustedGID.
# 信任组ID100,可以不锁定
# TrustedGID                    100



# Turn on compatibility hacks for broken clients
# 兼容不同客户端
BrokenClientsCompatibility  no



# Maximum number of simultaneous users
# 最大的客户端数量
MaxClientsNumber            50



# Fork in background
# 后台运行
Daemonize                   yes



# Maximum number of sim clients with the same IP address
# 每个ip最大连接数
MaxClientsPerIP             8



# If you want to log all client commands, set this to "yes".
# This directive can be duplicated to also log server responses.
# 记录日志
VerboseLog                  no



# List dot-files even when the client doesn't send "-a".
# 显示隐藏文件
DisplayDotFiles             no



# Don't allow authenticated users - have a public anonymous FTP only.
# 只允许匿名用户访问
AnonymousOnly               no



# Disallow anonymous connections. Only allow authenticated users.
# 不允许匿名用户
NoAnonymous                 yes



# Syslog facility (auth, authpriv, daemon, ftp, security, user, local*)
# The default facility is "ftp". "none" disables logging.
# 设置日志的告警级别,默认为ftp,none是禁止记录日志
SyslogFacility              ftp



# Display fortune cookies
# 定制用户登陆后的显示信息
# FortunesFile              /usr/share/fortune/zippy



# Don't resolve host names in log files. Logs are less verbose, but 
# it uses less bandwidth. Set this to "yes" on very busy servers or
# if you don't have a working DNS.
# 是否在日志文件中进行主机名解析,不进行客户端DNS解析
DontResolve                 yes



# Maximum idle time in minutes (default = 15 minutes)
# 最大空闲时间
MaxIdleTime                 30



# LDAP configuration file (see README.LDAP)
# LDAP 配置文件路径
# LDAPConfigFile                /etc/pureftpd-ldap.conf



# MySQL configuration file (see README.MySQL)
# MySQL 配置文件路径
 MySQLConfigFile              /usr/local/pureftpd/etc/pureftpd-mysql.conf


# Postgres configuration file (see README.PGSQL)
# Postgres 配置文件路径
# PGSQLConfigFile               /etc/pureftpd-pgsql.conf


# PureDB user database (see README.Virtual-Users)
# PureDB 用户数据库路径
 PureDB                        /usr/local/pureftpd/etc/pureftpd.pdb


# Path to pure-authd socket (see README.Authentication-Modules)
#  pure-authd 的socket 路径
# ExtAuth                       /var/run/ftpd.sock



# If you want to enable PAM authentication, uncomment the following line
# 如果你要启用 PAM 认证方式, 去掉下面行的注释
# PAMAuthentication             yes



# If you want simple Unix (/etc/passwd) authentication, uncomment this
# 如果你要启用 简单的 Unix系统 认证方式(/etc/passwd), 去掉下面行的注释
# UnixAuthentication            yes



# Please note that LDAPConfigFile, MySQLConfigFile, PAMAuthentication and
# UnixAuthentication can be used only once, but they can be combined
# together. For instance, if you use MySQLConfigFile, then UnixAuthentication,
# the SQL server will be asked. If the SQL authentication fails because the
# user wasn't found, another try # will be done with /etc/passwd and
# /etc/shadow. If the SQL authentication fails because the password was wrong,
# the authentication chain stops here. Authentication methods are chained in
# the order they are given. 



# 'ls' recursion limits. The first argument is the maximum number of
# files to be displayed. The second one is the max subdirectories depth
# 'ls' 命令的递归限制。第一个参数给出文件显示的最大数目。第二个参数给出最大的子目录深度。
LimitRecursion              10000 8



# Are anonymous users allowed to create new directories ?
# 是否允许匿名用户创建新目录
AnonymousCanCreateDirs      no



# If the system is more loaded than the following value,
# anonymous users aren't allowed to download.
# 超出负载后禁止下载
MaxLoad                     4



# Port range for passive connections replies. - for firewalling.
# 被动模式的端口范围
# PassivePortRange          30000 50000



# Force an IP address in PASV/EPSV/SPSV replies. - for NAT.
# Symbolic host names are also accepted for gateways with dynamic IP
# addresses.
# 强制一个IP地址使用被动响应
# ForcePassiveIP                192.168.0.1



# Upload/download ratio for anonymous users.
# 匿名用户的上传/下载的比率
# AnonymousRatio                1 10



# Upload/download ratio for all users.
# This directive superscedes the previous one.
# 所有用户的上传/下载的比率
# UserRatio                 1 10



# Disallow downloading of files owned by "ftp", ie.
# files that were uploaded but not validated by a local admin.
# 禁止下载匿名用户上传但未经验证的文件
AntiWarez                   yes



# IP address/port to listen to (default=all IP and port 21).
# 服务监听的IP 地址和端口。(默认是所有IP地址和21端口)
# Bind                      127.0.0.1,21



# Maximum bandwidth for anonymous users in KB/s
# 匿名用户带宽限制(KB)
# AnonymousBandwidth            8



# Maximum bandwidth for *all* users (including anonymous) in KB/s
# Use AnonymousBandwidth *or* UserBandwidth, both makes no sense.
# 所有用户的最大带宽(KB/s),包括匿名用户。
 UserBandwidth             1024



# File creation mask. <umask for files>:<umask for dirs> .
# 177:077 if you feel paranoid.
# 新建目录及文件的属性掩码值
Umask                       133:022



# Minimum UID for an authenticated user to log in.
# 认证用户允许登陆的最小组ID(UID) 
MinUID                      100



# Allow FXP transfers for authenticated users.
# 仅允许认证用户进行 FXP 传输。
AllowUserFXP                no



# Allow anonymous FXP for anonymous and non-anonymous users.
# 对匿名用户和非匿名用户允许进行匿名 FXP 传输
AllowAnonymousFXP           no



# Users can't delete/write files beginning with a dot ('.')
# even if they own them. If TrustedGID is enabled, this group
# will have access to dot-files, though.
# 不能删除/写入隐藏文件
ProhibitDotFilesWrite       no



# Prohibit *reading* of files beginning with a dot (.history, .ssh...)
# 禁止读取隐藏文件
ProhibitDotFilesRead        no



# Never overwrite files. When a file whose name already exist is uploaded,
# it get automatically renamed to file.1, file.2, file.3, ...
# 有同名文件时自动重新命名
AutoRename                  no



# Disallow anonymous users to upload new files (no = upload is allowed)
# 不允许匿名用户上传文件
AnonymousCantUpload         no



# Only connections to this specific IP address are allowed to be
# non-anonymous. You can use this directive to open several public IPs for
# anonymous FTP, and keep a private firewalled IP for remote administration.
# You can also only allow a non-routable local IP (like 10.x.x.x) to
# authenticate, and keep a public anon-only FTP server on another IP.
# 仅允许来自以下IP地址的非匿名用户连接。你可以使用这个指令来打开几个公网IP来提供匿名FTP,
# 而保留一个私有的防火墙保护的IP来进行远程管理。你还可以只允许一内网地址进行认证,而在另外
# 一个IP上提供纯匿名的FTP服务。
#
#TrustedIP                  10.1.1.1



# If you want to add the PID to every logged line, uncomment the following
# line.
# 如果你要为日志每一行添加 PID  去掉下面行的注释
#LogPID                     yes



# Create an additional log file with transfers logged in a Apache-like format :
# fw.c9x.org - jedi [13/Dec/1975:19:36:39] "GET /ftp/linux.tar.bz2" 200 21809338
# This log file can then be processed by www traffic analyzers.
# 使用类似于Apache的格式创建一个额外的日志文件
# AltLog                     clf:/var/log/pureftpd.log



# Create an additional log file with transfers logged in a format optimized
# for statistic reports.
# 使用优化过的格式为统计报告创建一个额外的日志文件
# AltLog                     stats:/var/log/pureftpd.log



# Create an additional log file with transfers logged in the standard W3C
# format (compatible with most commercial log analyzers)
# 使用标准的W3C格式创建一个额外的日志文件
# AltLog                     w3c:/var/log/pureftpd.log



# Disallow the CHMOD command. Users can't change perms of their files.
# 不接受 CHMOD 命令。用户不能更改他们文件的属性
#NoChmod                     yes



# Allow users to resume and upload files, but *NOT* to delete them.
# 允许用户恢复和上传文件,却不允许删除他们
#KeepAllFiles                yes



# Automatically create home directories if they are missing
# 用户主目录不存在的话,自动创建
CreateHomeDir               yes



# Enable virtual quotas. The first number is the max number of files.
# The second number is the max size of megabytes.
# So 1000:10 limits every user to 1000 files and 10 Mb.
# 限制用户可以创建的最大文件数和用户空间大小
Quota                       10000:10240



# If your pure-ftpd has been compiled with standalone support, you can change
# the location of the pid file. The default is /var/run/pure-ftpd.pid
# PID文件位置
#PIDFile                     /var/run/pure-ftpd.pid



# If your pure-ftpd has been compiled with pure-uploadscript support,
# this will make pure-ftpd write info about new uploads to
# /var/run/pure-ftpd.upload.pipe so pure-uploadscript can read it and
# spawn a script to handle the upload.
# Don't enable this option if you don't actually use pure-uploadscript.

# 如果你的 pure-ftpd 编译时加入了 pure-uploadscript 支持,这个指令将会使 pure-ftpd
# 发送关于新上传的情况信息到 /var/run/pure-ftpd.upload.pipe,这样 pure-uploadscript
# 就能读然后调用一个脚本去处理新的上传
#
#CallUploadScript yes



# This option is useful with servers where anonymous upload is 
# allowed. As /var/ftp is in /var, it save some space and protect 
# the log files. When the partition is more that X percent full,
# new uploads are disallowed.
# 文件所在磁盘的最大使用率
MaxDiskUsage               99



# Set to 'yes' if you don't want your users to rename files.
# 是否允许重命名文件(默认不允许)
#NoRename                  yes



# Be 'customer proof' : workaround against common customer mistakes like
# 'chmod 0 public_html', that are valid, but that could cause ignorant
# customers to lock their files, and then keep your technical support busy
# with silly issues. If you're sure all your users have some basic Unix
# knowledge, this feature is useless. If you're a hosting service, enable it.
# 打开以防止用户犯常识性错误
CustomerProof              yes



# Per-user concurrency limits. It will only work if the FTP server has
# been compiled with --with-peruserlimits (and this is the case on
# most binary distributions) .
# The format is : <max sessions per user>:<max anonymous sessions>
# For instance, 3:20 means that the same authenticated user can have 3 active
# sessions max. And there are 20 anonymous sessions max.
# 单个用户限制:每一个用户最大允许的进程;最大的匿名用户进程
# PerUserLimits            3:20



# When a file is uploaded and there is already a previous version of the file
# with the same name, the old file will neither get removed nor truncated.
# Upload will take place in a temporary file and once the upload is complete,
# the switch to the new version will be atomic. For instance, when a large PHP
# script is being uploaded, the web server will still serve the old version and
# immediatly switch to the new one as soon as the full file will have been
# transfered. This option is incompatible with virtual quotas.

# NoTruncate               yes



# This option can accept three values :
# 0 : disable SSL/TLS encryption layer (default).
# 1 : accept both traditional and encrypted sessions.
# 2 : refuse connections that don't use SSL/TLS security mechanisms,
#     including anonymous sessions.
# Do _not_ uncomment this blindly. Be sure that :
# 1) Your server has been compiled with SSL/TLS support (--with-tls),
# 2) A valid certificate is in place,
# 3) Only compatible clients will log in.

# TLS                      1


# List of ciphers that will be accepted for SSL/TLS connections
# Prefix with -S: in order to totally disable SSL but not TLS.

# TLSCipherSuite           HIGH:MEDIUM:+TLSv1:!SSLv2:+SSLv3



# Listen only to IPv4 addresses in standalone mode (ie. disable IPv6)
# By default, both IPv4 and IPv6 are enabled.

# IPV4Only                 yes



# Listen only to IPv6 addresses in standalone mode (ie. disable IPv4)
# By default, both IPv4 and IPv6 are enabled.

# IPV6Only                 yes

# UTF-8 support for file names (RFC 2640)
# Define charset of the server filesystem and optionnally the default charset
# for remote clients if they don't use UTF-8.
# Works only if pure-ftpd has been compiled with --with-rfc2640

# FileSystemCharset big5
# ClientCharset     big5




来自  https://www.jianshu.com/p/c5ef1a5fd08b  
普通分类: