You are here
我自己亲自做的手动连接无线网络 WLAN 有大用 有大大用 有大大大用 有大大大大用 有大大大大大用
星期日, 2024-05-19 14:22 — adminshiping1
下面的 AAAA-XXX 就是无线网络的SSID set_connect_wifi.py
#!/usr/bin/python3
#
# importing the os module
import sys
import os
import subprocess
import tkinter
from tkinter import messagebox
import time
def delete_all_ssid():
# 执行命令并获取输出
output = subprocess.check_output(["netsh", "wlan", "show", "profiles"])
# print(output)
# 将输出转换为字符串类型
output_str = output.decode('GBK')
# print(output_str)
# 查找所有SSID并打印出来
ssids = [line.split(": ")[1] for line in output_str.splitlines() if "AAAA"W n line]
for ssid in ssids:
print(ssid)
wlan_command = "netsh wlan delete profile name =\"" + ssid + "\"" + " interface = WLAN"
os.system(wlan_command)
# wlan_command = "netsh wlan delete profile name =\"" + name + "\"" + " interface = WLAN"
# defining the function to establish a new connection
# def create_new_connection_nst_str(name):
# config = f"""<?xml version="1.0"?>
# <WLANProfile xmlns="http://www.microsoft.com/networking/WLAN/profile/v1">
# <name>{name}</name>
# <SSIDConfig>
# <SSID>
# <hex>4C757873686172652D4E5354</hex>
# <name>{name}</name>
# </SSID>
# <nonBroadcast>true</nonBroadcast>
# </SSIDConfig>
# <connectionType>ESS</connectionType>
# <connectionMode>auto</connectionMode>
# <MSM>
# <security>
# <authEncryption>
# <authentication>WPA2</authentication>
# <encryption>AES</encryption>
# <useOneX>true</useOneX>
# </authEncryption>
# <PMKCacheMode>enabled</PMKCacheMode>
# <PMKCacheTTL>720</PMKCacheTTL>
# <PMKCacheSize>128</PMKCacheSize>
# <preAuthMode>disabled</preAuthMode>
# <OneX xmlns="http://www.microsoft.com/networking/OneX/v1">
# <authMode>machineOrUser</authMode>
# <EAPConfig><EapHostConfig xmlns="http://www.microsoft.com/provisioning/EapHostConfig"><EapMethod><Type xmlns="http://www.microsoft.com/provisioning/EapCommon">25</Type><VendorId xmlns="http://www.microsoft.com/provisioning/EapCommon">0</VendorId><VendorType xmlns="http://www.microsoft.com/provisioning/EapCommon">0</VendorType><AuthorId xmlns="http://www.microsoft.com/provisioning/EapCommon">0</AuthorId></EapMethod><Config xmlns="http://www.microsoft.com/provisioning/EapHostConfig"><Eap xmlns="http://www.microsoft.com/provisioning/BaseEapConnectionPropertiesV1"><Type>25</Type><EapType xmlns="http://www.microsoft.com/provisioning/MsPeapConnectionPropertiesV1"><ServerValidation><DisableUserPromptForServerValidation>false</DisableUserPromptForServerValidation><ServerNames></ServerNames><TrustedRootCA>96 8d cb c5 40 4f 71 7f 00 2a c2 6b 09 0d 0a db 55 cf 6a 17 </TrustedRootCA></ServerValidation><FastReconnect>true</FastReconnect><InnerEapOptional>false</InnerEapOptional><Eap xmlns="http://www.microsoft.com/provisioning/BaseEapConnectionPropertiesV1"><Type>26</Type><EapType xmlns="http://www.microsoft.com/provisioning/MsChapV2ConnectionPropertiesV1"><UseWinLogonCredentials>false</UseWinLogonCredentials></EapType></Eap><EnableQuarantineChecks>false</EnableQuarantineChecks><RequireCryptoBinding>false</RequireCryptoBinding><PeapExtensions><PerformServerValidation xmlns="http://www.microsoft.com/provisioning/MsPeapConnectionPropertiesV2">true</PerformServerValidation><AcceptServerName xmlns="http://www.microsoft.com/provisioning/MsPeapConnectionPropertiesV2">true</AcceptServerName><PeapExtensionsV2 xmlns="http://www.microsoft.com/provisioning/MsPeapConnectionPropertiesV2"><AllowPromptingWhenServerCANotFound xmlns="http://www.microsoft.com/provisioning/MsPeapConnectionPropertiesV3">true</AllowPromptingWhenServerCANotFound></PeapExtensionsV2></PeapExtensions></EapType></Eap></Config></EapHostConfig></EAPConfig>
# </OneX>
# </security>
# </MSM>
# <MacRandomization xmlns="http://www.microsoft.com/networking/WLAN/profile/v3">
# <enableRandomization>false</enableRandomization>
# <randomizationSeed>3104594341</randomizationSeed>
# </MacRandomization>
# </WLANProfile>
# """
# return config
def create_new_connection_str(name):
hex_representation = "".join([hex(ord(ch))[2:] for ch in name])
config = f"""<?xml version="1.0"?>
<WLANProfile xmlns="http://www.microsoft.com/networking/WLAN/profile/v1">
<name>{name}</name>
<SSIDConfig>
<SSID>
<hex>{hex_representation}</hex>
<name>{name}</name>
</SSID>
<nonBroadcast>true</nonBroadcast>
</SSIDConfig>
<connectionType>ESS</connectionType>
<connectionMode>auto</connectionMode>
<autoSwitch>false</autoSwitch>
<MSM>
<security>
<authEncryption>
<authentication>WPA2</authentication>
<encryption>AES</encryption>
<useOneX>true</useOneX>
</authEncryption>
<OneX xmlns="http://www.microsoft.com/networking/OneX/v1">
<cacheUserData>true</cacheUserData>
<authMode>user</authMode>
<EAPConfig><EapHostConfig xmlns="http://www.microsoft.com/provisioning/EapHostConfig"><EapMethod><Type xmlns="http://www.microsoft.com/provisioning/EapCommon">25</Type><VendorId xmlns="http://www.microsoft.com/provisioning/EapCommon">0</VendorId><VendorType xmlns="http://www.microsoft.com/provisioning/EapCommon">0</VendorType><AuthorId xmlns="http://www.microsoft.com/provisioning/EapCommon">0</AuthorId></EapMethod><Config xmlns="http://www.microsoft.com/provisioning/EapHostConfig"><Eap xmlns="http://www.microsoft.com/provisioning/BaseEapConnectionPropertiesV1"><Type>25</Type><EapType xmlns="http://www.microsoft.com/provisioning/MsPeapConnectionPropertiesV1"><ServerValidation><DisableUserPromptForServerValidation>false</DisableUserPromptForServerValidation><ServerNames></ServerNames></ServerValidation><FastReconnect>true</FastReconnect><InnerEapOptional>false</InnerEapOptional><Eap xmlns="http://www.microsoft.com/provisioning/BaseEapConnectionPropertiesV1"><Type>26</Type><EapType xmlns="http://www.microsoft.com/provisioning/MsChapV2ConnectionPropertiesV1"><UseWinLogonCredentials>false</UseWinLogonCredentials></EapType></Eap><EnableQuarantineChecks>false</EnableQuarantineChecks><RequireCryptoBinding>false</RequireCryptoBinding><PeapExtensions><PerformServerValidation xmlns="http://www.microsoft.com/provisioning/MsPeapConnectionPropertiesV2">false</PerformServerValidation><AcceptServerName xmlns="http://www.microsoft.com/provisioning/MsPeapConnectionPropertiesV2">false</AcceptServerName></PeapExtensions></EapType></Eap></Config></EapHostConfig></EAPConfig>
</OneX>
</security>
</MSM>
</WLANProfile>
"""
return config
def create_new_connection(name):
config = create_new_connection_str(name)
delete_all_ssid()
wlan_command = "netsh wlan delete profile name =\"" + name + "\"" + " interface = WLAN"
os.system(wlan_command)
# path一定要用绝对路径,否则提示没有分配给指定接口的配置文件
if getattr(sys, 'frozen', False):
# 如果是通过PyInstaller冻结的（打包成exe）
current_dir = os.path.dirname(sys.executable)
else:
# 如果是正常的python脚本运行
current_dir = os.path.dirname(os.path.abspath(__file__))
# path=current_dir+"\\"+name+".xml"
path=current_dir+"\\"+name+".xml"
# messagebox.showinfo("连接wifi", f"{path}")
# print(path)
# wlan_command = "netsh wlan add profile filename =\"" + name + ".xml\"" + " interface = WLAN"
wlan_command = "netsh wlan add profile filename =\"" + path
with open(path , 'w') as file:
file.write(config)
os.system(wlan_command)
# defining function to connect to a network
def wlan_connect(name):
wlan_command = "netsh wlan connect name =\"" + name + "\" ssid =\"" + name
os.system(wlan_command)
# defining function to display avavilabe Wi-Fi networks
def chuli_wifi(text):
create_new_connection(text)
# 延迟1秒
time.sleep(1)
wlan_connect(text)
# 延迟4秒
time.sleep(4)
#虽然没有提供用户名和密码,但是连接上之后的话,仍然会自动填上空的用户名密码,所以下面两行是要删掉这个wifi
wlan_command = "netsh wlan delete profile name =\"" + text + "\"" + " interface = WLAN"
os.system(wlan_command)
messagebox.showinfo("连接wifi", f"已打开{text},请查看")
root = tkinter.Tk()
text1 = "AAAA-WNT"
btn1 = tkinter.Button(root,text=text1,command = lambda: chuli_wifi(text1))
btn1.grid(row=0,pady=5)
print(btn1.grid_info())
text2 = "AAAA-WNB"
btn2 = tkinter.Button(root,text=text2,command = lambda: chuli_wifi(text2))
btn2.grid(row=1,pady=5)
print(btn2.grid_info())
text3 = "AAAA-WTT"
btn3 = tkinter.Button(root,text=text3,command = lambda: chuli_wifi(text3))
btn3.grid(row=2,padx=5)
text4 = "AAAA-WTB"
btn4 = tkinter.Button(root,text=text4,command = lambda: chuli_wifi(text4))
btn4.grid(row=3,pady=5)
text5 = "AAAA-WMT"
btn5 = tkinter.Button(root,text=text5,command = lambda: chuli_wifi(text5))
btn5.grid(row=4,pady=5)
text6 = "AAAA-WMB"
btn6 = tkinter.Button(root,text=text6,command = lambda: chuli_wifi(text6))
btn6.grid(row=5,pady=5)
text7 = "AAAA-WCC"
btn7 = tkinter.Button(root,text=text7,command = lambda: chuli_wifi(text7))
btn7.grid(row=6,pady=5)
root.title('连接 wifi')
root.geometry("225x290")
root.mainloop()
# connecting to the Wi-Fi network
print("If the system is not connected to this network, try connecting with the correct password!")
google "windows python knows ssid ,open windows ,make person input password" 有大用 有大大用 有大大大用 有大大大大用
https://www.javatpoint.com/how-to-connect-wi-fi-using-python 有大用 winwifi , Win32Wifi 模块,,这两个模块也行
https://stackoverflow.com/questions/63619312/how-to-brute-force-a-wifi-password-with-python
https://superuser.com/questions/43836/automatically-connecting-to-hidden-ssid-wifi-network
https://stackoverflow.com/questions/56721759/how-to-connect-to-wifi-network-on-windows
https://stackoverflow.com/questions/9202224/getting-a-hidden-password-input
https://stackoverflow.com/questions/63619312/how-to-brute-force-a-wifi-password-with-python
普通分类: